Yokogawa DAQWORX - Manual (Page 322)

8-65 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the CX1000/CX2000
FTP Settngs
Using the FTP function, measurement/calculation data can be automatically transferred
from the CX to the specified server as files. The FTP function can be used only with
Ethernet communications. When using the FTP function, specify the necessary [FTP
Connection] settings in the dialog box below.
2. Click the [Primary] or [Secondary] tab.
1. Click this tab.
Enter file transfer
destination settings.
Web Server Settngs
When using Ethernet communications, the CX can be set up as a web server. Set [Web
Server] to [ON], and then set the access certification for the operator page and monitor
page.
Click this tab
8.11 Network Settngs