Yokogawa DAQWORX - Manual (Page 199)

7-3 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the MV1000/MV2000
Creatng Setup Data by Confgurng a New System
2. The [System Configuration] dialog box
opens.
1. Double-click the CONFIG icon
on the desktop.
3. Click the appropriate items
and click the [OK] button to open
the Configurator screen.
Select [File]-[New] to create
new setup data from the second time.
Create the setup data according to step 2 and 3.
Loadng Preexstng Setup Data
2. The [Open] dialog box opens.
1. Select [File]-[Open].
Select a file with .PDL extension
and click here.
You can specify the location where the setup data file is located and open the
Configurator.
7.1 Startng the Hardware Confgurator (Openng the Hardware Confgurator Wndow)