Yokogawa DAQWORX - Manual (Page 188)

6-61 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the DX1000/DX2000
Connect lmts (Release number 3 or later)
Modbus Server
• Connect lmts
Select [ON] to place connection limits.
• Allowed IP Address
If you want to only allow certain IP addresses to connect to the DX Modbus server, set
[Use] to [ON] and enter IP addresses (in the range of 0.0.0.0 to 255.255.255.255) in
the [Allowed IP Address] boxes. You cannot enter host names.
Only the IP addresses specified here can connect to the DX Modbus server.
6.5 Enterng Basc Settngs