Display span, Alarm and tag, Tlog computation – Yokogawa DAQWORX User Manual
Page 312: Rolling average, Zone, graph, partial, and color, Constant, Display span -55, Alarm and tag -55, Tlog computation -55, Rolling average -55
8-55
IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the CX1000/CX2000
Dsplay Span
Set the upper and lower limits of the display.
The range is –9999999 to 99999999. Set the number of decimals to four digits or less.
Alarm and Tag
The settings are the same as the measurement channels. For details, see section 8.8,
“Measurement Channels Settings”.
TLOG Computaton
Tmer
Select one of the timers (1 to 3) set in the setup mode.
The computation interval of TLOG computation is set to the time assigned to the selected
timer.
Sum Scale
Set the sum scale.
Rollng Average
Rollng Average Computaton ON/OFF
Select whether to compute the rolling average.
Interval
Select the sampling interval when rolling average is activated.
Tmes (Number of Samples)
Select the number of samples (number of data points used to compute the rolling
average).
Zone, Graph, Partal, and Color
The settings are the same as the measurement channels. For details, see section 8.8,
“Measurement Channels Settings”.
Constant
You can set constants to be used in the expression. Up to 12 constants (CX1000) or up
to 30 constants (CX2000) can be specified.
8.9 Computaton Channel Settngs