Yokogawa DAQWORX - Manual (Page 304)

8-47 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the CX1000/CX2000
Copyng and Pastng Setup Data
You can copy the setup data of one channel or more to other channels. Use the following
procedure to copy and paste.
1. Click the source channel number that you want to copy. To select many channels,
click the first source channel, then drag over all the channels that you want to copy.
2. Click the [Copy] button at the bottom of the window.
3. Click the destination channel number. To select many channels, click the first
destination channel, then drag over all the channels where you want to paste.
4. Click the [Paste] button at the bottom of the window.
You can also copy and paste specific channel items.
After selecting the copy source in step 1, click the [Copy Details] button to display the
[Report Copy Details] dialog box.
Select the items that you want to copy.
Tag, Memory Alarm Tme, Dsplayed Language, and Partal Expanded Dsplay
Settngs
Click here. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)
Tag/Channel
Select whether to use the tag name or channel number as the measurement/computation
channel label.
If you select tag name, you can select the label display from tag and channel.
Memory Alarm
Free internal memory is monitored, and the memory end can be programmed to activate
some period of time before the memory is completely full. This time period is called the
memory alarm time.
Language
Select the language ([English], [Japanese], [German], [French], or [Chinese] (selectable
on Ver. 3.02 or later)) to be used on the CX's display.
Partal
If set to [Not], the partial expanded display settings of the Meas, Math, and Control tabs
are void.
8.7 Basc Measurement Functon Basc Settngs