Yokogawa DAQWORX - Manual (Page 39)

3-4 IM WX104-01E
General Dsplay Settngs
1. Click here ([Window] - [General Display Settings]).
3. Click the tab of the group to be configured.
Turn ON/OFF waveform display (Blue is ON)
Turn ON/OFF at once
The waveform corresponding to the waveform No. that is clicked becomes active.
Activate the settings and close the dialog box
Assign numbers to the channels in the selected range in ascending order
Register the channel
Show/Hide the Y-axis
Copy the settings of the first channel in the selected range to all other channels
Set the selected range at once
Initialize
Activate the settings
Copy the setup data of the
active waveform number
Select the items to be copied
Paste the copied setup
data to the active
waveform number
Enter the group name
Select normal display or exponential display
See section 3.5, “Displaying the Meter.”
Show/Hide the trip line
Enter the trip line
Enter the display position
Enter the display range
Display color
2. The [General Display Settings]
dialog box opens.
Group
A maximum of 50 groups can be set. A maximum of 32 channels can be registered in
one group.
You can change the group name. Up to 16 alphanumeric characters can be entered.
Turn ON/OFF the dsplay
Check the box of the waveform number to be displayed. This is synchronized to the
ON/OFF button of the waveform display of the zone display area.
3.2 Dsplayng the Trend