Yokogawa DAQWORX - Manual (Page 118)

5-22 IM WX104-01E
Settng the Temperature, Tag, Memory Alarm Tme, Dsplayed Language, and
Partal Expanded Dsplay
Click either one (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])
Temperature
Select the °C or °F for the temperature unit.
Tag/Channel
Select whether to use the tag name or channel number as the measurement/computation
channel label (See “Selecting the Characters Used to Identify Channels” on page 3-6).
If you select tag name, you can select the label display from tag and channel.
Memory alarm tme
Free space in the internal memory is monitored, and the memory full relay can be
programmed to activate some period of time before the memory is completely full. This
time period is called the memory alarm time.
Dsplayed language
Select the language to be used on the display.
The types of displayed language vary depending on the style number of the DX or MV.
If the style number is greater than or equal to 2, you can select German or French in
addition to English and Japanese.
Partal expanded dsplay
If the partial expanded display is set to [Not], the partial expanded display settings of the
Meas/Math tab are void.
Batch functon (opton)
You can set the batch function when the style number of the DX or MV is greater than or
equal to 2.
5.5 Confgurng the Setup Mode