Yokogawa DAQWORX User Manual

Page 163

Advertising
background image

6-36

IM WX104-01E

Detal Settng

• Tag

Settngs

Descrpton

Tag

Displays tags or tag numbers. Channel numbers are displayed for
channels that do not have tags or tag numbers assigned to them.

Channel

Displays channel numbers.

• Tag No. (Release number 3 or later)

Select [ON] to use tag numbers.

• Language

Select the display language

• Remote controller ID

Select the remote controller ID from 0 to 31. When not using the remote control
terminal, select [OFF].

• Decmal Pont Type (Release number 3 or later)

You can set the decimal point type for the display and files saved in text format. You

can select [Point] or [Comma].

• Menu dsplay (Release number 3 or later)

To display [Basic setting mode] (menu item for switching to basic setting mode) in the
setting mode menu, select [ON].

• Batch
Batch (when the mult batch functon s not nstalled)

Select [ON] to use the batch function.

Batch operaton qty (when the /BT2 mult batch functon s nstalled;

release number 3 or later)

Specify the number of batches to use.

Settngs

Descrpton

OFF

Disables the multi batch function and the batch function.

1

Enables the single batch function.

2 or higher

Enables the multi batch function. The table below shows the number of
batches supported by the DX1000 and DX2000.
Model

Number of Batches Supported

DX1000

2 to 6

DX2000 (standard memory model)

2 to 6

DX2000 (large memory model)

2 to 12

6.5 Enterng Basc Settngs

Advertising