Yokogawa DAQWORX - Manual (Page 57)

3-22 IM WX104-01E
3.7 Crcular Dsplay
Crcular Dsplay
1. Click here ([Window] - [Circular Monitor]).
Select the displayed group
Connect/Disconnect the monitor (section 3.8, 3.10)
Pause the monitor (section 3.9)
Turn ON/OFF the link (section 3.9)
Turn ON/OFF the alarm display
Set general display settings
Characters used to identify channels
The red bar blinks when an alarm occurs
Mark the active
waveform
Zone display area
Turn ON/OFF circular
display
Date
Cursor Absolute or
relative time
Move the waveform
display position (scroll bar)
Alarm display
Displayed time per cycle
Brightness adjustment
knob of the waveform
display area
2. The circular monitor opens.
Grid brightness
adjustment knob
Show/Hide zone
display area
Zoom in or zoom out of the time axis
Set the Y-axis
Display the cursor’s value
Waveform label
(Select channel No.
or tag)
General Dsplay Settngs
The parameters in the [General Display Settings] dialog box that are different between
the circular display and the trend display (section 3.2) are as follows:
Trp lne
The trip lines on the circular screen cannot be dragged and dropped.
You can change the position of the trip lines by changing the values in the [General
Display Settings] dialog box.