Setting one channel at a time, Setting one channel at a time -12, Settng one channel at a tme – Yokogawa DAQWORX User Manual
Page 139
Advertising
6-12
IM WX104-01E
Settng One Channel at a Tme
2. The channel setting
dialog box opens.
1. Double-click the
channel you wish to set.
Set the maximum possible value
Set the minimum possible value
For Ext channels
The items in the measurement channel tab can be configured for each channel. The
items that are configured are the same as those configured on the spreadsheet. For
details, see the page corresponding to the item.
6.2 Settng the Measurement Channels, Ext. Channels
Advertising
This manual is related to the following products: