Yokogawa DAQWORX - Manual (Page 323)

8-66 IM WX104-01E
E-mal Transmsson Settngs
When using e-mail transmission, specify [SMTP server name], [Port number], [Recipient1],
etc. For details about the settings.
Click this tab
By clicking the [Alarm], [Scheduled], [System], or [Report] tab, you can make settings
separately for each type of e-mail message.
Aux
Set the handling of the DO and internal switch when the communication buffer recovers
and the auto recovery of the communication with the Modbus master and controller.
These items are valid when serial communication is installed.
Click this tab
8.11 Network Settngs