Yokogawa DAQWORX - Manual (Page 246)

7-50 IM WX104-01E
• Logn method
To send the POP3 server login password without encryption, set POP3 Login to
[PLAIN]. To send the password with encryption, set POP3 Login to [APOP].
Alarm
Specify the settings for sending e-mail when alarms occur.
• Recpent1 and Recpent2
Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail
or [OFF] to not send e-mail.
• Actve alarms
Sends an e-mail when an alarm occurs. You can select [ON] (send e-mail) or [OFF] (not
send e-mail) for alarms 1 to 4.
• Include INST
Select [ON] to attach instantaneous value data when the alarm occurred.
• Include source URL
Select [ON] to attach the source URL. Attach the URL when the Web server is
enabled.
• Subject
Enter the subject of the e-mail using up to 32 alphanumeric characters. The default
setting is Alarm_summary.
• Header1, Header2
Enter header 1 and header 2 using up to 64 characters.
Scheduled
Specify the settings for sending e-mail at scheduled times.
• Recpent1 and Recpent2
Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail
or [OFF] to not send e-mail.
• Interval
Select the interval for sending e-mail to Recipient1 and Recipient2 from 1, 2, 3, 4, 6, 8,
12, and 24 hours.
• Ref. tme
Enter the time used as a reference for sending the e-mail at the specified interval to
Recipient1 and Recipient2.
• Include INST, Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is Periodic_data.
7.5 Enterng Basc Settngs