Yokogawa DAQWORX - Manual (Page 331)

9-3 IM WX104-01E
Error Messages and The
r Correct
ve
Act
ons
1
2
3
4
5
6
7
8
9
Index
Warnng Message
No. Message Reference Page,
Reference Secton
W3435 System settings have been changed. Input configuration and data will be initialized. Do you
want to proceed? 5-28
W3453 This pattern configuration will be initialized.Conutinue? 8-31
W3454 This pattern configuration will be initialized.Conutinue? 8-33
W6031 Current value is invalid, because the value is the same with line %d. –
W6032 Save change to %s? –
W6033 Start Memory sampling/Math. –
W6034 Memory sampling/computation will be stopped.
Stop Memory sampling/Math.
–
W6035 Contains invalid data
Contains invalid data
Open this setting?
–
W6036 Start Math –
W6037 Stop Math –
W6038 The current setup data will be initialized. 5-28, 6-50, 7-52,
8-4
W6039 Settings may not be made correctly since the configuration does not match the connected
recorder. Do you still want to send? Section 5.7, 6.6,
7.6, 8.13
W6040 5-27, 8-68
W6041 The setup data will be sent. Section 5.7, 6.6,
7.6, 8.13
W6042 Setup data will be received from the recorder. 5-2, 6-2, 7-2, 8-2
Data Montor
Error Message
Code Warnng message What to do
M3558 Connection failure. Please check the host name, port No.,
and server. Confirm whether the monitor server is running. Check
whether the host name and port number of the PC
that is running the monitor server are correct.
9.1 Error Messages and Ther Correctve Actons