Starting the configurator, Starting the configurator -2, Startng the confgurator – Yokogawa DAQWORX User Manual
Page 198
Advertising
7-2
IM WX104-01E
Startng the Confgurator
To create a new setup data file apart from the connected MV1000/MV2000, double-click
the CONFIG icon on the DAQ desktop or choose Fle > New in the MV1000/MV2000
Configurator to display the System Configuration dialog box. Configure the system, then
open the MV1000/MV2000 setting screen.
MV1000/MV2000 folder
1. Double-click here.
2. The MV1000/MV2000 Configurator
opens.
Print (section 7.9)
Display the version information of the Configurator
Scroll the screen (left and right)
Menu bar
Toolbar
Scroll the
screen
(up and down)
7.1 Startng the Hardware Confgurator (Openng the Hardware Confgurator Wndow)
Advertising
This manual is related to the following products: