Yokogawa DAQWORX - Manual (Page 249)

7-53 IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Conf
gur
ng the MV1000/MV2000
Server Functon
• Use
Select [Use] or [Not] (don’t use).
• Web server Use
For the Web item under Server, select [Use] or [Not] (don’t use). When [Use] is
selected, the Web page item is added to the basic setting mode menu.
• Operator
To set the operator page, select [ON].
• Operator Access Control
To use access control, select [ON]. You must enter a user name and password to
display the operator page. You must select [Login] as [Key Security] or [Comm.
Security] under [Environment] - [Detail Setting] in the [Basic Setting] tab, and
register users under the [User Registration].
• Command
To write messages, select [ON]; Otherwise, select [OFF].
• Montor
To display the monitor page on a browser, select [ON]; otherwise, select [OFF].
• Montor Access Control
Same as the Operator Access Control.
• SNTP Server Use
select [Use] or [Not] (don’t use).
• Modbus Server Use
select [Use] or [Not] (don’t use).
7.5 Enterng Basc Settngs