HP Remote Assistant Card - Manual (Page 108)

4 Setting Up the Remote Console
90
Connecting to HP Remote Assistant from an
HP NSA Management Console
HP NetServer Assistant (NSA) is a server management application used with HP
OpenView that comes standard with most HP NetServer systems. It allows you to
manage all your servers from a single console (local or remote). If you are using HP
NetServer Assistant for the management of servers with the HP Remote Assistant
accessory, you can set up your terminal emulation software (Terminal Plus,
pcANYWHERE32, or other software) as a tool that can be launched from within HP
NetServer Assistant.
NOTE If HP Remote Assistant software is installed before HP NetServer Assistant
software, the installation of HP NetServer Assistant will automatically set up
an HP Remote Assistant tool based on the default directories.
To set up HP Remote Assistant as an HP NetServer Assistant tool:
1. If you haven't done so already, follow the instructions for installing Terminal Plus
on your remote console.
2. Start HP OpenView for Windows from the HP OpenView Program group.
a) Select the Server icon of the server that has the HP Remote Assistant accessory.
b) Right-click the Server icon to display the drop-down menu. Then click "Launch
HP NetServer Assistant."
3. When the application's main window appears, click the Remote Management
group, then choose Tool from the Options menu.
4. Choose New from the Tool submenu.
The Tool Properties dialog box appears, displaying controls for specifying a new
HP NetServer Assistant tool.
5. In the Label entry area, type the name that will appear on the tool's button.
6. In the Name entry area, type a path to the executable file.
If you are using Terminal Plus, you would type:
c:\hpremote\hpremote.exe