HP Remote Assistant Card - Manual (Page 64)

2 Hardware Installation and Configuration
46
NOTE If the keyboard layout used by your server's operating system is not among
the layouts currently supported by HP Remote Assistant, contact your local
HP sales representative to see if a .KEY file has been developed for your
keyboard (or select the layout that most closely matches your keyboard).
When you choose Server Keyboard from the Configuration Menu, the Configuration
Utility displays the Server Keyboard window providing a scrollable list of available
keyboard layouts. When you first open the window, the currently configured layout is
highlighted. (The United States keyboard layout is the default.)
Use the arrow keys to highlight the desired keyboard layout, then press F10 to accept
the layout.
NOTE Keyboard layouts are provided in the form of .KEY files stored on the HP
Remote Assistant Server Diskette with the Configuration Utility. If you copy
the utility to a DOS partition, make sure that you also copy the layout (.KEY)
files to the same directory in which the Configuration Utility is stored.
Configuring Administrator Names
Before an administrator can use HP Remote Assistant to manage server operations
from remote sites, you need to supply HP Remote Assistant with information it
requires to communicate with an administrator at a remote console. This information
includes a name that identifies the administrator alias, a password that the
administrator will use to log in, a pager telephone number for notifications, a dial-back
telephone number, and the type of pager being used. You can configure up to eight
administrator aliases for remote management.