HP Remote Assistant Card - Manual (Page 8)

Regulatory Information
viii
The Load Number (LN) assigned to each terminal device denotes the percentage of the
total load to be connected to a telephone loop which is used by the device to prevent
overloading. The termination on a loop may consist of any combination of devices
subject only to the requirement that the total of the Load Numbers of all the devices
does not exceed 100. The Load number for this product is 33.
CAUTION Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or
electrician, as appropriate.
Notice for Sweden: National Post and Telecom Agency
Statement
The LAM Interface shall be connected to SELV (max. 42.4 V peak, or 60 V dc)
according to EN 60950. (The internal modem complies with this requirement.)
Notice for UK: General Approval
Pursuant to Section 22 of Telecommunications Act of 1984, this product is approved
for indirect connection to Public Telecommunications systems within the United
Kingdom under the General Approval number NS/G/1234/J/100003.
Safety
To reduce the possibility of an electric shock from the telephone network, plug the
computer into the AC outlet prior to connecting the network. Also, disconnect the
network before unplugging the computer from the AC power outlet.
Battery Disposal
The HP Remote Assistant EISA Board includes a rechargeable nickel-cadmium battery
(HP Part No. D2967-63214). This battery must be recycled or disposed of properly.
Contact your Hewlett-Packard representative for information on battery recycling. (In
the USA and Canada, call 1-800-333-1917.) For more information on battery
operations, see Appendix G.
CAUTION Do NOT crush, puncture, or incinerate the battery. Do NOT short the
battery’s external contacts.