Using the on-board modem (model d2968c) – HP Remote Assistant Card User Manual
Page 44
Advertising
2 Hardware Installation and Configuration
26
Using the On-board Modem (Model D2968C)
If your HP Remote Assistant board has an on-board modem, you can communicate
with remote consoles by using the telephone cable to connect the modem port on the
board to an RJ-11 telephone jack. At the remote console, there must also be a modem
connection to complete the data link. The following figure illustrates the connection
between the server and the remote console.
Phone
jack
Modem
Remote Consle
Phone
jack
RJ-11
cable
Server
Figure 2-12. Remote Connection Through the On-board Modem
Advertising