Using a direct serial connection – HP Remote Assistant Card User Manual
Page 47
Advertising
2 Hardware Installation and Configuration
29
Using a Direct Serial Connection
Instead of setting up modem communications, you can use a null modem cable to
connect the server directly to a remote console through each computer's serial
communications port. You can use this type of connection when you want to set up a
remote console at the same site as the server. The figure below illustrates a direct
connection between an HP Remote Assistant installed in a server and a stand-alone
terminal.
Null modem cable
Terminal
Server
Figure 2-15. Direct Connection with a Null Modem Cable
Advertising