HP Remote Assistant Card - Manual (Page 127)

5 Using HPRA to Manage Server Operations
109
NOTE If the HP Remote Assistant SNMP is loaded, server events can also generate
SNMP traps. (Settings in the Event Management Menu do not control the
generation of alarms.) For more information on configuring traps, see the
section, "Viewing HP Remote Assistant Alarms with HP NetServer
Assistant," later in this chapter.
Page on Voltage Threshold. When enabled, HP Remote Assistant sends a notification
when it detects a voltage outside the range specified in the configuration (or a
complete power failure).
Page on Temperature Warning Threshold. When enabled, HP Remote Assistant
pages administrators when it detects a temperature above the threshold specified as
acceptable.
High Temperature Graceful Shutdown. When enabled, HP Remote Assistant
performs a graceful shutdown of the server when it detects a temperature above the
range specified in the configuration. (HP Remote Assistant automatically performs a
power-down if the temperature climbs to five degrees above the threshold specified for
a graceful shutdown.)
Page on NOS Hang (ASR). When enabled, HP Remote Assistant sends a notification
whenever the server NOS has hung. For this option, the appropriate ASR driver
software must be installed on the server.
Restart on NOS Hang (ASR). When enabled, HP Remote Assistant initiates an
automatic server restart when the server NOS hangs. For this feature to be available,
the ASR driver software must be installed and configured for use with the server's
network operating system. For more information on setting up the ASR software, see
the section, "Setting Up the ASR Software," in Chapter 3.
Page on Illegal Login Attempt. When enabled, HP Remote Assistant sends a
notification whenever it detects three consecutive attempts by an unauthorized user to
log on to the server.
Page on Bus Utilization Threshold. When enabled, HP Remote Assistant sends a
notification if it detects a five-minute average bus utilization that goes above the
threshold specified as acceptable in the configuration.
Page on System Hardware Failure. When enabled, HP Remote Assistant sends a
notification whenever it detects a hardware failure (such as an ECC error or PCI bus
error). System hardware failure events are those listed in Appendix A with the format
8xxx and 9xxx.