HP Remote Assistant Card - Manual (Page 59)

2 Hardware Installation and Configuration
41
Select the appropriate button, and, if necessary, edit the modem initialization string.
(For a complete listing of the on-board modem's AT commands, see Appendix C.)
Press F4 to restore the factory defaults, or F10 to accept the settings and complete the
communications configuration.
External Modem
To configure communications for an external modem, choose Communications from
the Configuration menu. The Communications window appears, providing radio
buttons for specifying the type of data link you will be using: external modem or direct
connect. (If your HP Remote Assistant has an on-board modem that you want to
bypass, you must first select External Modem from the Communications window.)
Select External Modem, then press Enter. The External Modem window appears (see
next figure) in which you can enter an initialization string, and select a baud rate and
a dialing method (tone or pulse). The initialization string is in a text field and the
dialing methods are represented by buttons.