HP Remote Assistant Card - Manual (Page 51)

2 Hardware Installation and Configuration
33
The Main Screen
On startup, the Configuration Utility's main screen displays as follows:
The Configuration Summary window behind the Main Menu window displays
information that the Configuration Utility found after checking the board installation.
Details include the board model, the version of the HP Remote Assistant firmware
currently stored on the board, the user-defined identifying name and code number of
the server on which the board is installed, and the EISA slot number in which the HP
Remote Assistant board is installed.
Navigating the Configuration Utility
The Main Menu lists the commands available for configuring HP Remote Assistant.
In the Configuration Utility windows, you can move between fields by pressing the
Tab key (press Shift-Tab to move backwards). Within a field you can make selections
using the up or down arrow keys. Checkboxes are toggled on or off by pressing the
Spacebar. If you are running the Configuration Utility locally and are using a mouse
with a DOS driver, you can also click desired fields to select them.
When you quit the utility, you are asked if you want to save your changes. If you
respond No, your changes (if any) are discarded and HP Remote Assistant uses the
previously specified parameters for server management.