HP Remote Assistant Card - Manual (Page 92)

3 Server Software Installation and Configuration
74
f. Choose "Properties…" from the drop-down menu and in the "Connection Info"
section, verify that the COM port and modem type are set correctly. When
finished, click the "OK" button to return to pcANYWHERE32's main program
window.
g. Now, run the Modem connection item by double-clicking it. This initializes the
modem and establishes the Modem connection item you just set up as the
default.
NOTE The settings you have just selected become the pcANYWHERE32's defaults
for the server side installation. In order for the pcANYWHERE32 to properly
communicate with a remote console, the installation at the remote console
must use these same settings.
A pcANYWHERE32 icon pops up to indicate completion of the configuration process.
You are ready (on the server end) to support a remote connection. To customize your
host configuration for more options and greater security (such as creating a specific list
of allowed callers, or for using features such as call-back), refer to pcANYWHERE32's
online help.
Reinstalling the SNMP Agent and ASR Software
Reinstallation of the ASR service program requires the same steps as the installation.
However, the install program automatically starts the service without your having to
restart the system.
ASR Program files and Parameters for Windows NT
The following program files provide ASR for Windows NT:
NOTE By default, the ASR driver and ASR service programs are configured in the
registry to be started automatically. An administrator may change this to
manual control by using the standard Windows NT Service / Driver
configuration programs reached through Window's Program Manager. Click
Control Panel, then select Service or Drivers.
•
HPRADRV.SYS
The HP Remote Assistant driver.
•
ASRDEV.SYS
This ASR driver mediates communication between the ASR service program and
the HP Remote Assistant driver.