HP Remote Assistant Card - Manual (Page 175)

H LED Codes
157
CONFIGURATION EEPROM Failure Codes
LED
Code REPORT
codes Failure Name Failure Reason Possible Cause
1-3-1 1310 EEPROM INITIALIZE
FAILURE Configuration
section of the
EEPROM could not
be initialized Defective EEPROM
(U44)
1-3-2 1320 EEPROM CHECKSUM
FAILURE Checksum of the
configuration data
in the EEPROM not
correct New version of
firmware loaded.
Non-fatal error.
1-3-3 1330 EEPROM VERSION
FAILURE Format of the
configuration data in
EEPROM does not
match the format in
the FLASH
EEPROM Will be corrected
automatically by the
POST.
1-3-4 1340 EEPROM TEST INITIALIZE
FAILURE Test control section
of the EEPROM
could not be
initialized Defective EEPROM
(U44)