HP Remote Assistant Card - Manual (Page 109)

4 Setting Up the Remote Console
91
7. In the Parameters entry area, type the command line that will pass server names set
in HP NetServer Assistant on to HP Remote Assistant:
infonums.dcd %server%
The HP NetServer Assistant server name will be sent to the HP Remote Assistant
dialer so that launching HP Remote Assistant as a tool will automatically connect
you to the dialer entry that matches the server name.
NOTE If you are specifying server names for remote management in HP NetServer
Assistant, the names must match exactly the names set up in the HP Remote
Assistant Communications Software Dialer.
8. Click Change Icon to display the Change Icon dialog box, in which you can select
an icon for the HP Remote Assistant tool button.
9. Choose an icon and click OK to close the dialog box.
10. When the tool description is complete, click OK.
11. A tool button for HP Remote Assistant now appears in the Remote Management
group of HP NetServer Assistant tools. For example: