HP Remote Assistant Card - Manual (Page 145)

127
A Event Codes
The table below describes the event codes that can be sent via pager or listed in the
event log. When HP Remote Assistant sends a page about a server event, it includes
the server identifying number and a four-digit code identifying the event. It's a good
idea to copy appropriate sections of this table and keep it with the pager you use to
receive notifications.
Code Log Page Description Data Measured
0109 x x Server Power Failure
0111 x x -12V Upper Threshold Warning Millivolts
0112 x x Battery Upper Threshold Warning Millivolts
0113 x x +3.3V Upper Threshold Warning Millivolts
0114 x x +5V Upper Threshold Warning Millivolts
0115 x x +12V Upper Threshold Warning Millivolts
0121 x x -12V Lower Threshold Warning Millivolts
0122 x x Battery Lower Threshold Warning Millivolts
0123 x x +3.3V Lower Threshold Warning Millivolts
0124 x x +5V Lower Threshold Warning Millivolts
0125 x x +12V Lower Threshold Warning Millivolts
0211 x x Temp Warning (on-board sensor)
°
C
0221 x x Temp Graceful Shutdown (on-board sensor)
°
C
0231 x x Temp Critical Shutdown (on-board sensor)
°
C
0401 x Administrator Login Admin #
0402 x x Illegal Login Attempt # of consecutive
failed attempts
0403 x Low Battery Charge Millivolts
0404 x Board has shut down
0405 x Administrator Logout Admin #
0406 x Administrator Autologout Admin #
0407 x Administrator Connection Lost Admin #
0408 x Administrator Dialback Failed Admin #