HP Remote Assistant Card - Manual (Page 98)

3 Server Software Installation and Configuration
80
ASR Program Files and Parameters for SCO UNIX
The following program files provide ASR for SCO UNIX:
•
/dev/asr. The ASR driver. It provides the low-level interface to the ASR hardware.
•
/etc/asrdaemon. This program is a daemon that calls the driver to start and stop the
ASR timer. It also creates the process that notifies the ASR hardware that the OS is
still active (not hung). The ASR driver must be installed before the daemon can be
run.
•
/etc/asrcontrol. This program provides the user interface for starting and stopping
the timer. It uses UNIX IPC (a message queue) to make requests to the daemon.
The asr daemon must be loaded before this program can be executed. This program
only provides a command line interface and will print a usage message if the
proper command line arguments are not used. Valid command line parameters
are:
-s start ASR timer with default timeout (10 minutes)
-s <n> start ASR timer with timeout of <n> seconds
-x stop ASR timer