Match vlan – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1024
QoS Commands
Software Reference for x310 Series Switches
39.18
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
match vlan
Use this command to define the VLAN ID used as match criteria to classify a traffic class.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax
match vlan <1-4094>
no match vlan
Mode
Class Map Configuration
Examples
To configure a class-map named cmap1 to include traffic from VLAN 3, use the
commands:
To disable the configured VLAN ID as a match criteria for the class-map named cmap1, use
the commands:
Parameter
Description
<1-4094>
The VLAN number.
awplus#
configure terminal
awplus(config)#
class-map cmap1
awplus(config-cmap)#
match vlan 3
awplus#
configure terminal
awplus(config)#
class-map cmap1
awplus(config-cmap)#
no match vlan