Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 289)

Logging Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 10.17
log email (filter)
This command creates a filter to select messages to be sent to an email address. Selection
can be based on the priority/ severity of the message, the program that generated the
message, the logging facility used, a sub-string within the message or a combination of
some or all of these.
The no variant of this command configures the device to no longer send log messages to
a specified email address. All configuration relating to this log target will be removed.
Syntax log email <email-address> [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
no log email <email-address> [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
Parameter Description
<email-
address> The email address to send logging messages to
level Filter messages by severity level.
<level> The minimum severity of messages to send. The level can be
specified as one of the following numbers or level names, where 0 is
the highest severity and 7 is the lowest severity:
0 emergencies: System is unusable
1 alerts Action must be taken immediately
2 critical Critical conditions
3 errors Error conditions
4 warnings Warning conditions
5 notices Normal, but significant, conditions
6 informational Informational messages
7 debugging Debug-level messages
program Filter messages by program. Include messages from a specified
program in the log.