Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 193)

File Management Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 7.47
show running-config route-map
Use this command to show the running system status and configuration details for route-
map.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show running-config route-map
Mode Privileged Exec and Global Configuration
Example To display the running system status and configuration details for route-map, use the
command:
Output Figure 7-22: Example output from the show running-config route-map command
Related Commands copy running-config
show running-config
awplus# show running-config route-map
!
route-map abc deny 2
match community 2
!
route-map abc permit 3
match route-type external type-2
set metric-type type-1
!