Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 391)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.29
show interface switchport
Use this command to show VLAN information about each switch port.
Syntax show interface switchport
Mode User Exec and Privileged Exec
Example To display VLAN information about each switch port, enter the command:
Output Figure 15-2: Example output from the show interface switchport command
Related Commands show interface memory
awplus# show interface switchport
Interface name : port1.0.1
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 2
Configured Vlans : 2
Interface name : port1.0.2
Switchport mode : trunk
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 1
Configured Vlans : 1 4 5 6 7 8
...