Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 365)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.3
To disable back pressure flow control on interface port1.0.2 enter the following
commands:
Validation
Commands
show running-config
show interface
Related Commands duplex
clear loop-protection counters
Use this command to clear the counters for the Loop Protection counters.
Syntax clear loop-protection [interface <port-list>] counters
Mode Privileged Exec
Examples To clear the counter information:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# backpressure off
Parameters Description
interface The interface whose counters are to be cleared.
<port-list> A port, a port range, or an aggregated link.
awplus# clear loop-protection counters
awplus# clear loop-protection interface port1.0.1 counters