Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 283)

Logging Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 10.11
log buffered size
This command configures the amount of memory that the buffered log is permitted to
use. Once this memory allocation has been filled old messages will be deleted to make
room for new messages.
Syntax log buffered size <50-250>
Mode Global Configuration
Example To allow the buffered log to use up to 100 kB of RAM use the following commands:
Validation
Commands
show log config
Related Commands default log buffered
log buffered
Parameter Description
<50-250>
Size of the RAM log in kilobytes
awplus# configure terminal
awplus(config)# log buffered size 100