Epsr, Epsr configuration, Command for fu – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1529: Epsr epsr configuration
EPSR Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
58.3
epsr
This command sets the timer values for an EPSR instance. It is only valid for master nodes.
This command will not run on x310 Series switches, because these switches are only able
to function as transit nodes. To form an EPSR ring using x310 Series switches you will need
to use an alternative Allied Telesis switch such as an x610 Series switch as the master node.
epsr configuration
Use this command to enter EPSR Configuration mode so that EPSR can be configured.
Syntax
epsr configuration
Mode
Global Configuration
Example
To change to EPSR mode, use the command:
Related Commands
epsr mode master controlvlan primaryport
epsr
show epsr
awplus(config)#
epsr configuration