Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 776)

IGMP Snooping Commands
Software Reference for x310 Series Switches
31.38 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
ip igmp version
Use this command to set the current IGMP version (IGMP version 1, 2 or 3) on an interface.
Use the no variant of this command to return to the default version.
Syntax ip igmp version <1-3>
no ip igmp version
Default The default IGMP protocol version number is 3.
Mode Interface Configuration for a VLAN interface.
Usage This command applies to VLAN interfaces configured for IGMP.
Ensure your VLAN is configured first: see Chapter 16, Configuring VLANs .
Example
Validation
Commands
show ip igmp interface
Parameter Description
<1-3> IGMP protocol version number
awplus# configure terminal
awplus(config)# interface vlan5
awplus(config-if)# ip igmp version 2