Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 683)

IPv6 Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 27.5
Examples To enable SLAAC on the VLAN interface vlan2, use the following commands:
To disable SLAAC on the VLAN interface vlan2, use the following commands:
Validation
Commands
show running-config
show ipv6 interface brief
show ipv6 route
Related Commands ipv6 address
ipv6 enable
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# ipv6 address autoconfig
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 address autoconfig