Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 646)

IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
25.12 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To turn on all packet debugging on all interfaces on the switch, use the command:
To turn on TCP packet debugging on vlan1 and IP address 192.168.2.4, use the
command:
To turn off IP packet interface debugging on all interfaces, use the command:
To turn off IP packet interface debugging on interface vlan2, use the command:
Related Commands no debug all
tcpdump
terminal monitor
undebug ip packet interface
awplus# debug ip packet interface all
awplus# debug ip packet interface vlan1 address 192.168.2.4
tcp
awplus# no debug ip packet interface
awplus# no debug ip packet interface vlan2