Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 932)

IPv4 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
35.46 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip access-list
Use this command to display IP access-lists.
Syntax show ip access-list [<1-99>|<100-199>|<1300-1999>|<2000-2699>|
<access-list-name>]
Mode User Exec and Privileged Exec
Example
Output Figure 35-3: Example output from the show ip access-list command
Parameter Description
<1-99> IP standard access-list.
<100-199> IP extended access-list.
<1300-1999> IP standard access-list (expanded range).
<2000-2699> IP extended access-list (expanded range).
<access-list-name> IP named access-list.
awplus# show ip access-list
Standard IP access-list 1
permit 172.168.6.0, wildcard bits 0.0.0.255
permit 192.168.6.0, wildcard bits 0.0.0.255