Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 773)

IGMP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 31.35
Usage This command applies to IGMP operation on a specific interface to statically add group
and/or source records, or to IGMP Snooping on a VLAN interface to statically add group
and/or source records.
To ensure your VLAN is configured first, see Chapter 16, Configuring VLANs .
Example The following example show how to statically add group and source records for IGMP on
the VLAN interface vlan3:
awplus# configure terminal
awplus(config)# interface vlan3
awplus(config-if)# ip igmp static-group 226.1.2.4 source
10.2.3.4