Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 265)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 8.65
system territory
This command sets the territory of the system.
Use the no variant of this command to return the territory to its default setting of japan.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax system territory {australia|nz|europe|japan|usa|china|korea}
no system territory
Mode Global Configuration
Example To set the territory to USA, enter the command:
Validation
Commands
show system
Parameter Description
australia Australia
nz New Zealand
europe Europe
japan Japan
usa USA
china China
korea Korea
awplus(config)# system territory usa