Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1551)

AMF Introduction and Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 59.7
Working-set An AMF working-set is a set of nodes, which is either arbitrarily user defined, or one of the
pre-defined working-set groups. Specifying or selecting a working-set allows CLI
commands to be executed on all nodes within the selected working-set with a single
command. A working-set can be defined, selected and configured from any node within
an AMF network.
Figure 59-3: AMF Working-set
Master 1
Member 1
AMF
working-set
Master 2
Member 2
Member 6
Member 5
Member 4
Member 3
AMF Network