Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1686)

NTP Commands
Software Reference for x310 Series Switches
62.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ntp status
Use this command to display the status of the Network Time Protocol (NTP).
Syntax show ntp status
Mode User Exec and Privileged Exec
Example See the sample output of the show ntp status command displaying information about
the Network Time Protocol.
Figure 62-4: Example output from the show ntp status command
awplus#sh ntp status
Clock is synchronized, stratum 3, reference is 127.127.1.0
actual frequency is 0.0000 Hz, precision is 2**-19
reference time is cf11f3f2.c7c081a1 (00:44:34.780 UTC Tue Feb 2
2010)
clock offset is 0.000 msec, root delay is 0.000 msec
root dispersion is 7947729.000 msec,
awplus#