Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 412)

Switching Commands
Software Reference for x310 Series Switches
15.50 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To set the thrash limiting action to its default, use the following command:
To set the thrash limiting timeout to its default, use the following command:
Related Commands loop-protection
loop-protection action
loop-protection timeout
show loop-protection
undebug platform packet
This command applies the functionality of the no debug platform packet command on
page 15.8 .
undebug loopprot
This command applies the functionality of the no debug loopprot command on page
15.7 .
awplus(config-if)# no thrash-limiting action
awplus(config-if)# no thrash-limiting timeout