Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 584)

Link Aggregation Commands
Software Reference for x310 Series Switches
21.18 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To reference the pre-defined static channel group 2 as an interface apply the example
commands as below:
Related Commands show static-channel-group
undebug lacp
This command applies the functionality of the no debug lacp command on page 21.6 .
awplus# configure terminal
awplus(config)# interface port1.0.6
awplus(config-if)# static-channel-group 2
awplus(config-if)# exit
awplus(config)# interface port.1.0.6
awplus(config-if)# static-channel-group 2
awplus(config-if)# exit
awplus(config)# interface sa2
awplus(config-if)#