Show running-config – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 180
File Management Commands
Software Reference for x310 Series Switches
7.34
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show running-config
This command displays the current configuration of the device. The output includes all
non-default configuration; default settings are not displayed.
You can control the output in any one of the following ways:
■
To display only lines that contain a particular word, follow the command with
| include word
■
To start the display at the first line that contains a particular word, follow the
command with | begin word
■
To save the output to a file, follow the command with > filename
For more information, see
“Controlling “show” Command Output” on page 1.37
.
Syntax
show running-config
Mode
Privileged Exec and Global Configuration
Example
To display the current dynamic configuration of your device, use the command:
awplus#
show running-config