Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2097)

sFlow Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 81.3
debug sflow agent
This command enables sFlow® debug message logging that is not specific to particular
ports. For example, sending an sFlow datagram to the collector.
The no variant of this command applies the command default.
Syntax debug sflow agent
no debug sflow agent
Default The sFlow agent debug message logging (that is not port specific) is disabled.
Mode Privileged Exec
Example To enable logging of sFlow agent debug messages, use the following command:
Related Commands show debugging sflow
debug sflow
awplus# debug sflow agent