Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 284)

Logging Commands
Software Reference for x310 Series Switches
10.12 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
log console
This command configures the device to send log messages to consoles. The console log is
configured by default to send messages to the devices main console port.
Use the no variant of this command to configure the device not to send log messages to
consoles.
Syntax log console
no log console
Mode Global Configuration
Examples To configure the device to send log messages use the following commands:
To configure the device not to send log messages in all consoles use the following
commands:
Validation
Commands
show log config
Related Commands log console (filter)
awplus# configure terminal
awplus(config)# log console
awplus# configure terminal
awplus(config)# no log console