Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 910)

IPv4 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
35.24 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Example 2
[adding to a list]
Use the following commands to add a new access-list filter entry at sequence position 5 in
the access-list named my-list that will accept packets from source address
10.10.1.1/24
to destination address 192.68.1.1/24:
Related Commands access-list extended (named)
access-list (extended numbered)
show running-config
show ip access-list
awplus# configure terminal
awplus(config)# access-list extended my-list
awplus(config-ip-ext-acl)# 5 permit ip 10.10.1.1/24 192.168.1.1/
24