Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 615
Power over Ethernet Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
23.17
Related Commands
show power-inline counters
show power-inline interface
Class
The class of the connected PD, if power is being supplied to
the PD from the PSE. See the Power over Ethernet
Introduction chapter for further information about PD
classes and the power levels assigned per class.
Max (mW)
The power in milliwatts (mW) allocated for the PoE port.
Additionally, note the following as displayed per PoE port:
■
[U] if the power limit for a port was user configured
(with the
command).
■
[L] if the power limit for a port was supplied by LLDP.
■
[C] if the power limit for a port was supplied by the PD
class.
Table 23-1: Parameters in the show power-inline command output(cont.)
Parameter Description